Monsoon season in Kingman, Arizona, brings a mix of relief from the summer heat and challenges for pool owners. Strong winds, heavy rain, and dust storms can quickly throw your pool’s chemistry and cleanliness out of balance. Without the right maintenance, you could face cloudy water, clogged filters, and even algae blooms.
The good news? With a consistent weekly checklist tailored for Kingman’s monsoon conditions, you can keep your pool healthy, clean, and ready for use—even during the stormiest weeks. Here’s what to check every week when maintaining your pool in monsoon season.
1. Skim and Remove Debris
Monsoon storms are notorious for blowing dirt, leaves, and other debris straight into your pool. If left floating, debris sinks, stains surfaces, and clogs your system.
Weekly Task:
- Skim the pool surface at least 2–3 times a week, or daily after major storms.
- Use a leaf rake for debris that has already sunk to the bottom.
- Empty skimmer baskets and pump baskets to maintain proper water flow.
Keeping up with debris removal helps your pool look cleaner and prevents added strain on your filtration system.
2. Test and Balance Pool Water
Monsoon rains can dilute your pool chemicals and change water chemistry almost overnight. The dust storms add even more imbalance by raising alkalinity and pH.
Weekly Task:
- Test pH, chlorine, and alkalinity at least twice a week during monsoon season.
- Adjust chlorine to stay between 1–3 ppm.
- Keep pH balanced between 7.4 and 7.6 to prevent irritation and equipment damage.
- Watch calcium hardness and stabilizer levels, as rainwater can dilute them.
Balanced water is your strongest defense against algae growth, cloudy water, and unnecessary chemical costs.
3. Brush Pool Walls and Floor
Monsoon season accelerates algae growth due to warmer water and fluctuating chemistry. Brushing the walls and floor prevents buildup before it becomes a problem.
Weekly Task:
- Brush the entire pool surface once or twice a week.
- Pay extra attention to shaded corners, steps, and other areas with low circulation.
This small habit saves you from costly algae treatments and keeps your pool looking sparkling clean.
4. Clean and Inspect the Filter
Your pool filter works overtime in Kingman’s monsoon season. Dust, mud, and plant debris quickly clog cartridges, DE grids, and sand filters, reducing efficiency.
Weekly Task:
- Check filter pressure weekly. A high reading means it’s time to clean.
- Rinse cartridge filters with a hose.
- Backwash sand or DE filters as needed.
During peak storm weeks, you may need to clean the filter more than once. Keeping it clear ensures proper circulation and reduces chemical use.
5. Maintain Proper Water Levels
Heavy rains can overflow your pool, while evaporation from hot desert days can lower water levels dramatically. Both extremes put stress on your pump and skimmer.
Weekly Task:
- Check the waterline after each storm.
- Drain excess water if it rises above the skimmer opening.
- Add fresh water if levels dip too low.
Proper water level helps your pump and skimmer function effectively, protecting your equipment.
6. Shock the Pool as Needed
Even with good weekly care, monsoon storms often introduce contaminants that overwhelm your chlorine levels. That’s where shocking comes in.
Weekly Task:
- Shock the pool weekly during monsoon season, or immediately after a heavy storm.
- Follow product directions for dosage, based on your pool size.
This prevents algae blooms, keeps water crystal clear, and ensures a safe swimming environment.
7. Inspect Pool Equipment
Wind, lightning, and rain can all affect your pool equipment. A quick weekly inspection helps you catch small problems before they become expensive repairs.
Weekly Task:
- Check pump seals and look for leaks.
- Make sure electrical components are dry and safe.
- Ensure pool covers, ladders, and rails remain secure after strong winds.
Equipment checkups keep your pool safe and running efficiently throughout storm season.
Pro Tips for Kingman Pool Owners During Monsoon Season
- Use a pool cover: When storms are predicted, cover your pool to minimize debris and chemical disruption.
- Run the pump longer: Circulate water 10–12 hours daily after storms to clear contaminants.
- Schedule professional maintenance: A local Kingman pool service can provide deeper inspections and handle post-storm cleanups.
Monsoon season in Kingman doesn’t have to spell disaster for your pool. With a consistent weekly maintenance routine—including skimming debris, testing and balancing chemicals, brushing walls, cleaning filters, monitoring water levels, shocking, and checking equipment—you’ll protect your pool and enjoy safe swimming all summer long.